MPT Products
Liquid Glass Products
Liquid Glass Legend
Detail Spray
Wash Concentrate
LVR Protectant
LVR Cleaner
Nautical Liquid Glass
Appearance System Kit
Auto Chic Car Covers
Auto Chic Armrests

Nautical Liquid Glass photo

Nautical Liquid Glass® Polish/Finish

16 oz. Nautical Liquid Glass Polish – $26.95 each

Nautical Liquid Glass is non-abrasive and can be used on any fiberglass, metal, or wood boat without fear of scratching or hazing. It will not harm or remove gel or clear coat. In fact, there is no need to paint your boat's hull if it is protected by Nautical Liquid Glass! It retards barnacles, algae, and salt water erosion while reducing friction. Try it on your boat hull, as well as any other non-porous surface you wish to protect, e.g. chrome, brass, stainless steel, etc. of props, rudders, and motors. For Application Instructions, CLICK HERE.

Other Liquid Glass Products:

Nautical Liquid Glass Polish/Finish Application Instructions

Before using, shake can well! The surface must be clean and dry. All wax residue on surface should be removed. We recommend the use of Liquid Glass Pre-Cleaner. Our Pre-Cleaner will ensure optimum results by prepping/cleaning dull, stained, oxidized, or previously waxed surfaces, thus enabling the Nautical Liquid Glass Polish/Finish to adhere better to the applied surface.

Apply Nautical Liquid Glass sparingly, but evenly, using a coarse cotton cloth in a straight back and forth movement. Apply one section at a time. The ideal applied surface temperature should be between 50 and 80 degrees. (If any paint color appears on the cloth, it is oxidized paint that must be removed to reveal the good paint layer beneath.) After a haze appears on the surface, wipe off with a clean, dry cloth. Terry cloth or Turkish towel may be used.

For best results, allow at least four hours between coats to permit "curing." When finished, "baking" boat in the sun will bond Nautical Liquid Glass Polish/Finish to the surface. The greater the number of coats, the greater the protection afforded. Liquid Glass Wash Concentrate can be used to remove debris and refreshen between coats.

Occasionally on dark colored surfaces, streaking may occur. Temperature, previously used wax products, and buffing cloths are all things that can affect streaking. Streaks can be eliminated by rebuffing the surface with a damp cloth.

Nautical Liquid Glass Polish/Finish can be applied to any nonporous surface including aluminum, stainless steel, brass, glass, ceramic tile, etc. There are thousands of uses for business or in the home. Caution should be used, however, since a long-lasting slippery finish can be dangerous in places (for example, bath tub or shower floor). Do not use on porous surfaces such as fabrics, upholstery, leather, vinyl, etc. UNDER NO CIRCUMSTANCES SHOULD NAUTICAL LIQUID GLASS BE APPLIED TO SURFACES WHERE SOLID FOOTING AND TRACTION ARE REQUIRED.

FOR REPAINTING ONLY: Liquid Glass may be removed by first washing with a strong solution of high quality car wash detergent, then using 00 steel wool with mineral spirits or Varsol. (This same procedure should be used to remove any wax product from a surface before repainting.) Wipe dry and sand with desired grade of sandpaper before repainting., 6-B Hamilton Business Park, 85 Franklin Road, Dover, NJ 07801
Hours: Monday - Friday, 8:00 am to 5:00 pm, Eastern Time
Toll Free: (800) 351-0605
Phone: (973) 989-9220 – Fax: (973) 989-9234

MPT Products | Liquid Glass Products | Liquid Glass Legend | Liquid Glass Polish/Finish | Liquid Glass Detail Spray | Liquid Glass Pre-Cleaner | Liquid Glass Wash Concentrate | Connoisseur's Choice Protectant | Connoisseur's Choice Cleaner | Nautical Liquid Glass | Liquid Glass Total Appearance System Kit | Auto Chic Car Covers | Auto Chic Armrests

© 2011 MPT Industries. All Rights Reserved.
MPT® is a registered trademark of MPT Industries. Liquid Glass®, Legend® and Connoisseur's Choice® are registered trademarks of Liquid Glass Enterprises, Inc. Auto Chic® is a registered trademark of MPT Racing Inc.